Troubleshooting
|
29
Problem
Solution
The flash is set up as a wireless
slave, but the light is not
noticeable in the picture.
• Make sure that the master flash is within the transmission range,
and that the wireless sensor on the slave is pointing toward the
master flash. Remove any obstructions in the line of sight between
the two (page 24).
• The ambient light may be too high (page 24).
The edges of the images
look dark.
Make sure that the flash output power setting corresponds to the focal
length of your lens.
The bottoms of the images
look dark.
Your camera’s shutter speed is higher than the flash’s maximum sync
speed in manual mode.
