16
|
Using Flash Exposure Compensation
3. Press the shutter release button on your camera halfway to ensure that the camera is communicating
with the flash. The camera’s aperture settings will appear on the flash LCD, and a flash icon will appear in
the camera’s viewfinder.
4. Press your camera’s shutter release button to take the picture.
Using Flash Exposure Compensation
Flash exposure compensation allows you to adjust and optimize your flash’s automated setting by increasing
or decreasing its light output without affecting the exposure as a whole.
In automatic TTL mode, you can use flash exposure compensation to incrementally alter the VC-310’s flash
output, just as you would change exposure with the exposure compensation function on your camera.
To apply flash exposure compensation, follow these steps:
1.
VC-310F and VC-310OP:
Press the Set button so that the flash exposure compensation value is
highlighted and appears on the LCD.
VC-310SMI:
Press the Set button so that the flash exposure compensation value blinks.
2. Use the left or right arrows to adjust the exposure compensation from -3 to +3 stops, in increments of
one-third.
3. Press the Set button to confirm the value.
