28
|
Troubleshooting
Problem
Solution
The flash is stuck in the camera
hot shoe.
Make sure that the locking wheel is released (page 11).
The flash is turned on but
won’t fire.
• Make sure that fresh batteries are installed and in the proper
orientation (page 10).
• Make sure the flash is securely attached to the camera (page 11).
• Make sure that the electrical contacts on the foot of the flash are not
dirty. Clean them and try again.
• The flash has entered overheating protection mode. Turn the unit off
for 2–5 minutes to let it cool down (page 13).
There’s a whining sound coming
from the flash.
This is normal and does not indicate a malfunction. When the flash
heats up from continuous use, vibrations inside the unit may cause this
sound. It will dissipate as the unit cools.
Troubleshooting
