Manual Optical Slave Modes S1/S2
|
23
To set the VC-310 to manual optical slave mode S1/S2, follow these steps:
1. Press the Mode button repeatedly until the S1 or S2 indicator appears on the LCD.
2.
VC-310F
and
VC-310OP:
Press the Set button to highlight the output level.
VC-310SMI:
Press the Set button so that the output level blinks.
3. Use the left and right arrows to adjust the output level from 1/1 to 1/128.
4. Press the Set button to confirm your settings.
Warning:
Some cameras, when set to red-eye reduction, will emit a series of quick flashes lasting a second or
more. This may not work properly with any slave mode. We suggest you avoid using red-eye reduction when
the VC-310 acts as a slave.
