14
The following parameters appear for the two
Multicast Addresses (Audio Cast)
(i.e.,
outgoing streams) and for each of the
Multicast Addresses
(i.e., incoming streams) con
-
figured for this device.
a. Available only when Enable SIP Calls has a value of Yes.
Enabled
(audio cast only)
Enables audio signals from the Line Input ports to be sent
to the specified multicast addresses and ports.
Multicast IP Address
Specifies the multicast IP address on which to send or
receive audio streams.
Multicast Port Number
Specifies the multicast port on which to send or receive
audio streams.
Codec
Specifies the codec to be used when encoding or decod
-
ing audio. Select one of the following values:
• G711 u-law
• Intercom call quality
• A narrowband audio codec that provides toll-qual
-
ity audio at 64 kbps. The u-law version is primarily
used in North America and Japan.
• G711 a-law
• Intercom call quality
• A narrowband audio codec that provides toll-qual
-
ity audio at 64 kbps. The a-law version is primarily
used in most countries outside of North America
and Japan.
• G722
• Tone and paging quality
• A wideband audio codec operating at 48, 56, and
64 kbps.
• OPUS
• Music quality
• An audio codec format designed for speech and
general audio, supporting low latency, constant and
variable bitrate encoding (6 to 510 kbps), and five
sampling rates (from 8 to 48 kHz).
