10
The following table describes the
Configuration Settings
tab settings when Standalone
Operation is
not
enabled for this device:
Figure 5. Appliance Configuration Settings (Standalone disabled)
Table 5. Configuration Settings (Standalone disabled)
Get Configuration from
Server
Retrieves configuration settings (i.e., web username,
server, and local port) from the TFTP server specified in
the Network Settings (see
).
Web Username
Identifies the username of the current user.
Emergency-All-Call
Identifies the IP address, port number, cut level (vol
-
ume), and station list used for emergency all-call
pages.
All-Call
Identifies the IP address, port number, cut level (vol
-
ume), and station list used for all-call pages.
Audio Distribution
Identifies the IP address, port number, cut level (vol
-
ume), and station list used for audio distribution.
Multicast #
Identifies the IP address, port number, cut level (vol
-
ume), and station list used for the multicast audio
stream of one (or more) zones.
