General
1.2
Introduction
Page 4
BOGE Operating instructions for C 10 L...C 20 L series screw compressors
The operating instructions must be available to the compressor operating per-
sonnel at the place of operation, at all times.
The operating instructions must be carefully read and applied by all persons
engaged to undertake the following work on the compressor:
–
Operation, including fault rectification and daily care
–
Maintenance (service, inspection, repair)
–
Commissioning
–
Transport
The compressor and its additional equipment must not be installed and com-
missioned until the operating instructions are understood.
These operating instructions can be supplemented with instructions on the
basis of existing national regulations concerning accident prevention and envi-
ronmental protection.
In the illustrations, the compressor is shown in part without safety cladding or
safety devices for better visualization. However, operation without these com-
ponents is prohibited!
Symbols used
In these operating instructions, important safety instructions and tips are iden-
tified by the following symbols:
DANGER: Risk of injury!
This symbol indicates information warning of possible danger to life and limb
of the operator or other persons.
CAUTION!
This symbol indicates information warning of dangers to life and limb of the
operator or other persons or dangers, which might destroy or damage the
compressor.
DANGER: Voltage!
This symbol indicates information warning of life threatening electrical volt-
age levels.
It indicates work which must be exclusively performed by skilled electricians.
NOTICE!
This symbol indicates information and tips concerning the economical and
careful operation of the compressor.
