BOECO TC-PRO
Thermal Cycler Chapter Four Operation Guide
—
17
—
box.
If the current Control Mode is block mode, press "Run" running into the file operation
interface; If the current control mode is Tube mode, press "Run" key,then pop-up the
following dialog box.
The same as main interface, user could input the actual password, sample type and number of
sample volume (Unit: Micro liter) according to the practicality
Note
：
The sign“*”at the top of User and File indicates the current running file is default
one, which can be modified in the parameter setting interface.
In this interface, you can edit sections and
segments of the file. A File is comprised
by sections and segments. And the
sections contain many segments, which
you can set cyclers to be run (refer to the
figure).
Move
cursor by pressing
“Up/Down”
and “
Right /Left
”, and the
position that the cursor reaches will be
displayed in white on a black background.
Press
“Digit&Letter”
to
modify
parameter settings. Press
“Function”
to
/-.
Press “
+Seg.
” to enter into segment
edit interface. In every segment, the user can set setting temperature (Temp.), duration
(Time), Ramping rate (Ramp), temperature increment of every Temp) and time
increment of every cycler (+Time). Press
“Delete”
to delete the present segment
Press
“+Cycle”
to enter into segment edit interface, where the user can set cycle numbers
and initial cycle segment. The figure shows a cycle from the first segment to the third one,
and there are totally 10 times cycles.
Press
“+Cycle”
repeatedly to add sections (max.: 5 sections ). Press
“Delete”
to delete the
current segment. Move cursor by pressing
“Up/Down”
to enter into the former segment or
Hotlid=off
2007-11-1 10:05:00
100
75
50
25
0
Temp
1c 95.0 2c 55.0 3c 72.0 4
04.0
Time
01:00 02:00 01:45 00:00
Seg. Temp(
C
) Time Ramp(C/s) +Temp +Time
1c
9
5.0 01:00 #.# +0.0 +0:00
2c 55.0 02:00 #.# +0.0 +0:00
3c 72.0 01:45 #.# +0.0 +0:00
4 04.0 00:00 #.# +0.0 +0:00
Cycle1
：×
10 From 01 to 03
+Seg.
+Cycle Delete Back Save
File Edit Interface
Select Tube Type
0.2ml
050
μ
l
Select Sample Volume:
050
μ
l