BOECO TC-PRO
Thermal Cycler Chapter Three Preparations
—
11
—
Main Body
Main Unit Connecting Plug
Locating set
Block
Unlocking Device
Rotator
Locking Handle
Note
：
1. Make sure to switch off the power supply before installing block.
2. When install block, please pay close attention to push the block slowly;
Otherwise , the main unit connecting plug may be damaged.
3. When uninstall block, please draw the block from the slot gently. It’s forbidden
to lean the block for fear of snap of connection wire.
4. After installation, the block unit will be recognized by the main body
automatically, and will be ready for work without any other operation.
4.2 Dismantlement Steps
a) Power off firstly, make sure to dismantle or replace the block.
b) Uplift the locking handle, it will sound “kaka”, and the block will move backwards
simultaneously.
c) Take out the block through the locking handle. The dismantlement is finished.
⑦
②
①
③
⑤
⑥
④