15
METER INSTRUCTIONS
FUNCTION BUTTONS:
MODE:
Press MODE to check TIME/RPM/CAL or COUNT/DIST/PULSE.
Press and hold MODE 3s to set the TARGET RPM.
Press and hold MODE 5s to reset all data to ZERO.
FUNCTIONS & OPERATIONS:
Batteries Installation
Please install 2 pieces of AAA 1.5V batteries in the battery case on the back of monitor.
(Whenever Batteries are removed, all the functions values will be reset to zero.)
SCAN:
Displays SCAN/TIME/RPM/CAL or SCAN/COUNT/DIST/PULSE every 6 seconds
automatically.
TIME:
Accumulates total working time from 0:00 up to 99:59, then back to 0:00.
If there is no signal, TIME stop to count in 4s.
COUNT:
Accumulates total working count from 0 up to 9999, then back to 0.
DISTANCE:
Accumulates training distance from 0.0 up to 999.9 m, then back to 0.0.
CALORIE:
Accumulates calories consumption during training from 0.0 up to 9999 kcal, then back to
0.0.
RPM:
The actual time RPM.
PULSE:
If you have purchased an optional chest belt your current pulse rate will be displayed on
the LCD console whenever you wear the wireless chest belt. The console will display
pulse readings from 40bpm to 240bpm. A Pulse rate outside of this range will not be
shown.
If the heart rate signal isn’t detected for 16 seconds, the monitor will show “P”.
TARGET RPM:
Press MODE for 3s to set the TARGET RPM, it increases 5 each time when press MODE
key.
