![background image](http://html1.mh-extra.com/html/bodyworx/j1325caq/j1325caq_owners-manual_2783601021.webp)
TREADMILL MAINTENANCE
Proper maintenance is very important to ensure a faultless and operational condition of
the treadmill. Improper maintenance can cause damage to the treadmill or shorten the life
of the product. All parts of the treadmill must be checked and tightened regularly. Worn
out parts must be replaced immediately.
BELT ADJUSTMENT
You may need to adjust the running belt during the first few weeks of use. All running belts
are properly set at the factory. It may stretch or be off-center after use. Stretching is
normal during the break-in period.
ADJUSTING THE BELT TENSION:
If the running belt feels as though it is
―
slipping or hesitating when you plant you foot
during a run, the tension on the running belt may have to be increased.
TO INCREASE THE RUNNING BELT TENSION:
1. Place a 8mm wrench on the left belt tension bolt. Turn the wrench clockwise 1/4 turn
to draw the rear roller and increase the belt tension.
2. Repeat STEP 1 for the right belt tension bolt. You must be sure to turn both bolts the
same number of turns so the rear roller will stay square relative to the frame.
3. Repeat STEP 1 and STEP 2 until the slipping is eliminated.
4. Be careful not to tighten the running belt tension too much as you can create
excessive pressure on the front and rear roller bearings. An excessively tightened
running belt may damage the roller bearings that would result in bearing noise from
the front and rear rollers.
TO DECREASE THE TENSION ON THE RUNNING BELT, TURN BOTH BOLTS
COUNTER - CLOCKWISE THE SAME NUMBER OF TURNS.
CENTRING THE RUNNING BELT
When you run, you may push off harder with one foot than the other. The severity of the
deflection depends on the amount of force for that one foot exerting in relation to the other.
This deflection can cause the belt to move off-centre. This deflection is normal and the
running belt will centre when no body is on the running belt. If the running belt remains
20
Owner’s Manual
Summary of Contents for J1325CAQ
Page 25: ...ASSEMBLY PICTURE 24 Owner s Manual...
Page 35: ...BODYWORX BODY WORX...