Bodyworx J1325CAQ, Owner'S Manual

Page: 19 / 35

(
Ⅺ
I): Troubleshooting
Problem Possible cause Corrective action
a. No connect to power supply Plug into socket
b. Safety switch not insert Insert safety switch in monitor
c. Cut off the signal circuit
system
Check control panel and signal
cable
d. Treadmill is not switch on Switch on
Treadmill does not
work
e .Burnt fuse Change fuse
a .Belt not adjusted Adjust belt by silicon Belt does not run
properly b. Belt too tight Adjust belt
a. Belt is too loose Adjust the belt
Belt is slipping
b .Propulsion belt is too loose Adjust the belt
ERROR MESSAGE AND SOLUTION:
Problem Reason How to settle the problem
A: Did not connect the power supply Connect the power supply
B: Safety key did not put well
Well put the safety key on the
correct position
C: Transformer did not fix well or
transformer defected.
Fix well the transformer or change
the transformer
Treadmill can
not work
D: Electro circuit interrupt
Check the connect wire and the
terminal of the connect wire and
connect well.
A: Safety key fall off Put well the safety key.
Treadmill stop
suddenly
B: The electronic system problem Ask for the after sale service
A: Connect wire loose or defected
Well connect the wire or Change
the wire
B: Computer defected Change the computer
C: Transformer defected Change the transformer
E01
D: Controller defected Change the controller
18
Owner’s Manual