Bodyworx J1325CAQ, Owner'S Manual

Page: 16 / 35

(VIII): Program Mode:
1: When the Initialization Time is 30:00 minutes at the beginning, press the speed + and
Speed – key to adjust the time you want.
2: Press the “Start” key the motor start to run, the speed will be comply with the setting
speed.
3: Press the speed + and speed- key to adjust the speed want.
4: Press the i and incline - key to adjust the incline want.
5: Press the quick speed key to adjust the speed you want directly.
6: Press the quick incline key to adjust the incline you want directly.
7: There are 10 numbers of Segments for each program; the setting time for each
program is 1/10.
8: The Conversion between the segment and the segment will advance 3 seconds and
the second tweet.
9: Press the “Stop” key, the motor will be stopped gradually.
10: Press the “Start” key, the motor will be run, and the Initialization speed is start from
1.0km/h, and increased progressively to the speed which showed on the speed
window.
11: The setting time range is 5:00 - 99:00.
12: When the setting time is decreased progressively to the Zero, the speed will be
abated until stopped and an alarm will sound off 5 times. The middle display window
will display the time. Press the “start” key again and the speed will start from
1.0km/h, and increased progressively until the speed which on the window showed is
reached. The time is calculating, each speed of the program is setting on to 99:00,
and will be run each 30:00 minutes.
(IX): Auto Power-Off instruction:
①
: When the treadmill stops 10 minutes without any key interaction, it will go into the
shutdown state.
②
: When the treadmill goes into sleep mode, press any key to wake up the computer.
15
Owner’s Manual