43
7.1 Cleaning
Cleaning:
If required, wipe the plastic casing and the cuff
with a damp cotton cloth only.
Important note:
The PressureTel
™
cuff may not be washed
or dry-cleaned.
7.2 Metrological inspection and adjustment
The manufacturer has calibrated the device for a period of two
years. Metrological inspection and adjustment must take
place at least every two years. Metrological inspection and
adjustment is subject to a fee and can be carried out by I.E.M.
GmbH, a responsible authority, or an authorised maintenance
service.
Disposal of used electrical and electronic appliances,
including batteries:
This symbol on a product or its packaging indicates that this
product must not be disposed of with normal household was-
te, but must be handed over to a designated collection point
for the recycling of electrical waste and electronic equipment.
For more information, please contact your local city office,
your household waste disposal service or the shop where you
purchased the product.
7 Care and maintenance
