Assembly
5
Console Installation
1. Remove the four pre-installed
Screws
from the rear of the
Computer Console
.
2. Connect the
Wire Harness Connectors
leading out from the top of the
Mast
to the
Wire Harness Connectors
from the back of the
Computer Console
.
3. Install the
Computer Console
to the
Mast
using the four previously removed screws.
Be careful not to pinch the wires.
4. Battery must be connected before using this console. Connect the battery located in
the rear of the
Computer Console
by opening the battery cover and connect the plug
as shown. Fail to do so will result console to malfunction.
Main Frame
Computer
Console
Located at the back of
the Computer Console
Summary of Contents for ECT1000g
Page 1: ...ECT1000g Elliptical Cross Trainer ...
Page 22: ...19 Assemblies View ...
Page 23: ...15 19 PARTS LIST Assemblies Parts List 20 ...
Page 24: ...Detailed Exploded View 21 ...
