Troubleshooting
18
Computer not working correctly
Check all connections at the top and base of the Mast. Unplug and reconnect each of the connectors
to ensure all of the computer cables are connected securely.
Disconnect the battery from the rear of the Computer Console for 5 minutes, then reconnect.
The elliptical trainer wobbles when in use
If you have recently relocated your machine or if the jam nuts on the levelers have worked loose, you
may need to re-adjust the levelers. Follow the procedure for leveling the machine in this manual.
Squeaking noise when in use
Inspect all frame bolts that may have worked loose on the elliptical trainer. Re-tighten any loose
bolts. Check levelers.
No, inconsistent, or erratic heart rate reading
Your Elliptical Trainer is equipped with contact handgrip pulse and a wireless 5 kHz heart rate
receiver. You should first try to to determine which is causing the problem. If you are seeing a
reading without holding onto the contact sensors, it is likely the wireless receiver that is the problem.
Wireless:
Unusually high, low or random numbers in the heart rate display indicate a problem.
Try moistening the electrodes on the heart rate belt.
The batteries in the belt may be failing. Replace batteries or the Heart Rate belt.
The problem may be caused by interference. Televisions, microwaves, wireless alarms and electric
fences are just a few items that can cause interference. You can try relocating the machine to a
different part of the room. If you continue to have problems, please contact Bodycraft for additional
troubleshooting of wireless heart rate issues.
Contact Heart Rate:
Always hold on to the handlebar grip sensors with two hands instead of just one.
Try to maintain moderate pressure while holding onto the hand pulse sensors.
Make sure that the wire connections for the hand pulse sensors are secure.
Compare the stationary grip pulse to the grip pulse on the dual action arms. If you get a accurate
readout out with the stationary grips, the problem is that your hands are losing grip during the
workout.
Summary of Contents for ECT1000g
Page 1: ...ECT1000g Elliptical Cross Trainer ...
Page 22: ...19 Assemblies View ...
Page 23: ...15 19 PARTS LIST Assemblies Parts List 20 ...
Page 24: ...Detailed Exploded View 21 ...
