BodyCraft BC-XFT, Assembly And Operating Instructions Manual

Page: 14 / 60

14
XFT
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Base Legs and Base Frame
L
NOTICE
Make sure to align the base legs and base frame correctly, so the pulley holder is facing the rear
side.
1. Attach the right base leg (2R) to the base frame (1) with two bolts (93) and two spring washers
(120) as well as two bolts (100) and two spring washers (121).
2. Attach the left base leg (3L) to the base frame (1) with two bolts (93) and two spring washers
(120) as well as two bolts (100) and two spring washers (121).
3. Tighten all bolts by beginning with the bolts (100).