assembly instructions
Remove the four
Screws (#55)
that are pre-assembled on the back
of the
Monitor (#1)
and set them aside as they will be used later in
this step.
A. Connect
Monitor Wire (#1a)
to the
Main Sensor Wire (Middle)
(#2)
as illustration below.
B. Secure the
Monitor (#1)
to the bracket of the Center Post (#7)
using four
Screws (#55)
.
C. Insert
Hand Pulse Sensor Wire (Upper) (#4)
to the hole on the
back of the
Monitor (#1)
as illustration below.
Attach the
Center Handle Bar (#39)
to the
Center Post (#7)
secure
them together by using two
Bolts (#40)
, two
Spring Washers (#10)
and two
Arc Washers (#20).
The assembly process is now complete. However, for your own
safety, please make sure to read this entire Owner’s Manual which
includes safety instructions and warnings, as well as any
safety/warning labels affixed to the product before use.
For your safety, please visually and functionally inspect and test
the unit after assembly is complete.
S T E P 6
P A R T S
20
10
40
7
1
2
1a
39
13
4
55
1
4
C
1
55
B
1a
2
A
x2
#10
x2
#40
Page 11
HBR35
x4
#55
x2
#20
D. Correctly insert and install 2 AAA batteries to power
Monitor (#1).
