Safety & wARNINGS (USAGE GUIDELINES)
• Make sure all nuts, bolts, and screws are tightened prior to use.
• Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
• Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
• Check for loose parts and components and make proper adjustments prior to use.
• Check to see if there are any tears or bends in the welding or metal prior to use. If tears or bends are found, do NO
T
use the
unit and contact our CUS
T
OMER SUPPOR
T
.
• Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be snagged into any portion
of the bike when the unit is in motion. Failure to follow these instructions could result in serious injury, including the loss of
fingers.
• Always wait for the pedals and other moving parts (which can gain great momentum during riding) to come to a complete stop
before dismounting the unit to avoid serious injury.
• Please be aware that the pulse sensors and body fat measurement tool are not medical devices; the pulse sensors and body
fat measurement tool should not be used or applied for medical reasons.
1. Using one hand to hold
Seat Post (#27)
, unscrew
Spring Loaded Knob (#24)
using the other hand.
2. Slide and adjust
Spring Loaded Knob (#24)
t o the desired hole setting to your preferred height.
3. Holding
Spring Loaded Knob (#24)
at this setting, re-insert/re-screw
Spring Loaded Knob (#24)
, ensuring it engages and fully
inserts through the holes of
Main Frame (#23)
and
Seat Post (#27)
. Please make sure to securely tighten
Seat Post (#27)
but
not over-tighten.
4. Before sitting on the cycle, press down firmly and pull up slightly on the seat to make sure it is engaged and secure.
how to adjust the seat
NOTE:
T
o safely move, transport, and/or store the unit, please seek the help of capable assistants (minimum 2 people total).
1. Position one person on each side of the bike (one on the left, and one on the right).
2. Have each person use the hand closest to the
Seat (#33)
to grip it. Then, grip the other hand from underneath the respective
Left/Right Handle Bars (#16L/16R)
. (These are the safest areas to avoid injury during this process.)
3. Have both people simultaneously lift the unit to move/transport the unit to the desired area.
how to emergency stop
NOTE: Always wait for the pedals and other moving parts (which can gain great momentum during riding)
to come to a complete stop before dismounting the unit to avoid serious injury.
1.
T
o reduce speed on the bike, you may use the combinations of your feet on the
Left/Right Pedals (#25L/25R)
and your
hands on the
Left/Right Handle Bars (#16L/16R)
to gently and safely apply counter-momentum.
2.
W
ait for the flywheel, handlebars, and pedals to come to a complete stop.
3. Now you may safely dismount the unit.
how to safely move/transport for storage
• Please review all safety instructions and warnings in this entire Owner
’
s Manual, as well as any safety/warning labels affixed
to the product before use.
• Do not use solvent cleaners. If in any doubt, do not use your cleansing product; contact CUS
T
OMER SUPPOR
T
.
• For any replacement warning labels, please contact our CUS
T
OMER SUPPOR
T
at (888) 266-6789 or (909) 598-9876, or mail
in a written request to: Body Flex Sports, Inc. 21717 Ferrero Parkway,
W
alnut, C
A
91789.
More detailed information about how to reach our CUS
T
OMER SUPPOR
T
may be found on Page
1
of the Owner
’
s Manual
under the “CUS
T
OMER SUPPORT” section.
• The specific Parts on your unit which may see possible signs of wear after prolonged use are listed as follows (please check
these parts before each use):
Seat (#33); Pedals (#25L/25R); Handle Bars (#16L/16R).
maintenance & care
HBR35
Page 12
