BRT7989/7200
Page 9
Assembly STEP 3
Hardware Required
COUPLER BAR ASSEMBLY (Part I)
Referring to the drawing below, insert the
Axle (#19)
through the
horizontal stems on the
Center Post (#02)
. Then, on the left side of
the
Axle (#19)
-- in the following order, slide one
Wavy Washer
(#54)
followed by the
Left Coupler Bar (#05)
, one
D Shape Washer
(#53)
, one
Round Cap (#76)
, one
Washer (#52)
, and secure using
one
Bolt (#31)
.
On the opposite side of the
Axle (#19)
, assemble -- in the following
order: one
Wavy Washer (#54)
followed by the
Right Coupler Bar
(#06)
, one
D Shape Washer (#53)
, one
Round Cap (#76)
, one
Washer (#52)
, and secure using one
Bolt (#31)
.
9
#54 Wavy Washer (Ø19mm)
[2 pieces]
#31 Bolt (M8 x 20mm)
[2 pieces]
#53 D Shape Washer (19mm)
[2 pieces]
#52 Washer (M8)
[2 pieces]
#76 Round Cap
[2 pieces]