Customer Service 1-888-707-1880 9 Maurice Pincoffs Canada Inc.©2008
STEP 5
1. Attach the Stationary Handlebar w/handpulse (5) to the bracket of the Front post (25).
Secure using four Allen bolts (9), eight Arc washer (86) and four Domed nuts (12). Hand
tighten only.
2. Connect the Extension Handpulse wire (87) from the back of the front post (25) to the
Handpulse wire (11). Connect the Extension Handpulse wire (87) to the wire from the
back of the monitor (18). Connect the Extension Computer Wire (28) to the wire from
the back of the Monitor (18).
3. Slide the Monitor (18) on to the top bracket of the Front post (25). Secure the Monitor
(18) using two screws (8). Note: Ensure that the wires are away from the bracket when
sliding on the monitor.
NOW FIRMLY TIGHTEN ALL NUTS AND BOLTS
YOUR UNIT IS NOW FULLY ASSEMBLED
