Bodum Bistro 11303, Instructions For Use Manual

Page: 12 / 132

11
BISTRO
and run the blender for 5 to 10 seconds on the speed
setting. Remove the jar and empty contents. Rinse the jar
with warm water.
– The lid and the lid cap can be washed in warm water
with a few drops of dishwashing liquid. Rinse and dry
thoroughly.
– The jar, lid and lid cap can be also washed in the dish-
washer. The lid and lid cap are only dishwasher safe on
the top rack.
– Use a damp cloth only to clean the motor base. Make sure
the appliance is unplugged.
– Never immerse the motor base, mains plug or cord in
water: remember that this is an electrical appliance.
– Any other servicing should be performed by an autho-
rized service representative.
STORING THE BLENDER
– The cord should always be stored in the cord retainer (9).
– Note: always keep the blender disconnected from the
mains when not using it.
DEFECTS
Immediately unplug the appliance if it is defective or if a defect
is suspected. Have the appliance examined, and if necessary
repaired, by the nearest authorised BODUM
®
dealer. Repairs
and any other servicing to the blender should only be carried
out by authorised service personnel. Inadequate repair can
create significant hazards to users. BODUM
®
cannot accept
any liability for damage caused by inadequate repairs.
Under these circumstances the guarantee will be void
TECHNICAL DATA
Rated voltage EUROPE 220 – 240 V~ 50 Hz /60 Hz
Rated voltage USA 120 V~ 60Hz
Rated output EUROPE 500 W
Rated output USA 500 W
Cord length approx. 110 cm/43.5 inches
Approval marks GS, CE, ETL, CETL