14. TECHNICAL CHARACTERISTICS
Description
Features
Dimensions (mm)
Length=131 Height=189 Depth=59
Weight of the terminal
0.64
kg (terminal only)
Battery
6
V / 1,6
Ah
0.12
kg
The battery with reference 932236 cannot be replaced by a
battery of another type.
Power supply voltage
110-230
V
AC
, 50/60
Hz 100-65
mA
Max. electrical consumption
Under 230 V
AC
voltage
Mains supply (110-230
V
AC
, 50/60
Hz 100-65
mA)
Electrical Umbilical Plug option
IEEE 802.3af - 12.95 W - category 3
Power supply category
Category II
Mains supply diagram
TT or TN diagram
Protection index
IP 31
Operating temperature
0
°C to +40
°C
Relative humidity
15 to 90
% non-condensing
Time backup
6 years with internal CR1225 Lithium battery
Lithium battery
There is a risk of explosion if the lithium battery is inserted
incorrectly. Use the same model or an equivalent model
recommended by this manual when changing the battery.
Follow the instructions in this manual when replacing the
lithium battery. The battery must only be replaced by
maintenance staff.
The battery must be a CR1225-type
Lithium battery.
Relay switch
Disconnection 230
V
AC
50
Hz/60
Hz 1
A maximum.
Possibility to switch a SELV voltage (Separated Extra Low
Voltage).
Cable on relay terminal block
0.5
mm
2
to 1.5
mm
2
cross section, stripped over 5
mm
Ethernet 10/100 Mbits link
Use a category 5 or 5e shielded network cable (connect the
cable shielding to the host terminal block provided)
Clocking storage capacity
Backup time
10
000 max
10 years
Badge reader
Proximity 125
kHz STID/HID
Proximity 13.56
MHz
Clocking distance
4
cm
4
cm
Ethernet connection
10/100
Mb/s
© 2013 Bodet Software. All rights reserved.
