Bodart & Gonay Infire EASY, Manual

Page: 33 / 37

33
5. Malfunctions
Identify your problem in the column "observations" and follow the order of possible causes.
OBSERVATIONS CAUSES CORRECTIVE ACTIONS
BACKFLOW WHEN
LIGHTING 1. IMPROPER LIGHTING METHOD
- PROCEED WITH REVERSE LIGHTING, WITH ENOUGH
SMALL PIECES OF WOOD (SEE CHAPTER ON
LIGHTING)
2. COLD CHIMNEY
- PROCEED WITH REVERSE LIGHTING, WITH A LOT OF
SMALL PIECES OF WOOD (SEE CHAPTER ON
LIGHTING)
3. ATMOSPHERIC CONDITIONS
- PROCEED WITH REVERSE LIGHTING, WITH A LOT OF
SMALL PIECES OF WOOD (SEE CHAPTER ON
LIGHTING)
- WAIT FOR BETTER CONDITIONS
4. DEPRESSED ROOM
- INCREASE THE AIR SUPPLY TO THE ROOM (OPEN
DOOR, WINDOW AND/OR SWITCH OFF ANY SUCTION
SYSTEM)
5. BADLY ADJUSTED BAFFLES
- CHECK POSITION
- MAKE A TEST WITH MAXIMUM OPENING
6. DUCT OBSTRUCTION - INFORM THE INSTALLER
FIRE DOES NOT
START CHECK CAUSES 2 – 3 – 4 – 5 - 6 - APPLY THE APPROPRIATE CORRECTIVE ACTION
7. INSUFFICIENT IGNITION
COMBUSTIBLE MATERIAL - INCREASE THE QUANTITY OF COMBUSTIBLE
MATERIAL
8. EXCESSIVE MOISTURE OF THE
IGNITION COMBUSTIBLE MATERIAL - REPLACE IT WITH A DRIER COMBUSTIBLE MATERIAL
FIRE IS DORMANT
CHECK CAUSES 3 – 4 – 5 - APPLY THE APPROPRIATE CORRECTIVE ACTION
9. EXCESSIVE COMBUSTIBLE
MATERIAL MOISTURE - ADD DRIER COMBUSTIBLE MATERIAL
10. SMALL AMOUNT OF
COMBUSTIBLE MATERIAL - INCREASE AT LEAST TO NOMINAL LOAD
11. POOR QUALITY OF
COMBUSTIBLE MATERIAL - USE SPLIT WOOD WITHOUT BARK OF ADEQUATE
THICKNESS AND PROPERLY LAID OUT
12. AIR BOX MALFUNCTION - CONTROL THE MOVEMENT OF THE MOBILE AIR
FLAP
13. INSUFFICIENT AIR INTAKE - CHECK FOR CLEANLINESS AND CORRECT
DIMENSIONING OF THE AIR INTAKE
CHECK CAUSES 3 - 5 - APPLY THE APPROPRIATE CORRECTIVE ACTION
14. HIGH AMOUNT OF
COMBUSTIBLE MATERIAL - RESPECT THE NOMINAL LOAD
15. POOR QUALITY OF
COMBUSTIBLE MATERIAL - USE SPLIT WOOD OF ADEQUATE CROSS-SECTION,
WITHOUT BARK AND PROPERLY LAID OUT