Steel frame Table form lift TL 1512
70
213300043
7.2 Protective measures in the event of high wind speeds
1
All personnel must leave the lift immediately.
2
Lower the platform to the ground station.
3.
Switch the Table lift off and secure the switch to prevent accidental
restart.
4.
Disconnect the power supply to the lift.
5.
Leave the area of the lift and st
ay out of harm’s way.
6.
Only restart the lift if the wind speed remains in the permissible range
over a longer period of time.
7.3 Switching on the Table lift
7.3.1 Safety precaution prior to switching the lift on
Before switching the lift on, ensure the lift is in flawless condition.
Prior to switching the lift on, check
the lift for external damage
the integrity of the power supply line
the mast to ensure its path is unobstructed, e.g., check for
- protruding building parts
- foreign objects on the mast
- obstacles below the platform
STOP
DANGER!
Life-threatening injuries may occur if lift is
damages. Do not attempt to operate the lift if
damage has occurred!
If damage on the lift is detected or obstacles are
blocking its travel path, immediately contact the
responsible department or supervisor.
Subsequently, the responsible department or
supervisor will initiate the appropriate action to
repair the damage or remove the obstacle.
Within the danger zone of the machine there is
the inherent risk of life-threatening injuries.
Prior to switching the lift on, ensure all personnel
has left the danger zone or is not placed in harm's
way by the lift.
