Steel frame Table form lift TL 1512
213300043
59
6.1.1 Pendant control panel at the ground station
1
2
3
4
Fig. 45: Pendant control panel at the ground station.
How to operate the pendant control panel
The pendant control panel can be used to activated the lift if the
key-operated switch of the platform control is in the following
positions:
1
“Outside”
The operation of the lift from the inside is not
possible.
3
“Automatic”
The lift can be operated from the outside
only if the lift was not activated from the
inside previously.
Position Fig. 45
Designation
Function
1
EMERGENCY-OFF
Stopping the lift in an emergency
situation
2
UP
The platform move up
(Activation is possible in switch
positions 1 + 3)
3
Stop - at next floor
The platform stops at the next floor
4
DOWN
The platform moves down.
