EN
32
The lift motors for height adjustment
must be plugged into the appropriate
sockets on the box motor.
The cables should each be run along the
connecting tubes of the lifting compo-
nents.
The main power cable must be screwed to
the tab on the mattress support frame
with the strain relief device located on the
cable.
If applicable, insert the trapeze bar into
the mounting bracket. Ensure that it is
locked in place with the groove. Test the
operation of the nursing care bed, includ-
ing adjusting the position and height of
the mattress support frame.
Your domiflex 3 nursing care bed is now
ready for use.
Bock Safety Note
Check all screw and tool-free connections again before the care bed is put into operation.
Bock Safety Note
Cables must not be pinched or crushed. Repositioning of moveable parts may only be used for
the intended purpose. Hermann Bock GmbH assumes no liability for unauthorised technical
modifications.
