BOB’S SPACE RACERS®
WATER BLAST
TM
(LINKABLE) ARCADE
9
14. Fill the game tank with 5 gallons of water
.
NOTE: ANY WATER CAN BE USED, HOWEVER
USING DISTILLED WATER WILL KEEP YOUR
GAME MUCH CLEANER AND SPOT FREE AND
EXTEND YOUR WATER CHANGE INTERVALS.
15. Set the game's GAME / DRAIN valve to the drain
position.
16. Press the PROGRAM button on the game's
programming panel to access the programming
options.
17. Press the OPTION button and advance to the
DRAIN option.
18. Press the VALUE button to turn the pump on and
off.
NOTE: THE PUMP IS RUN ON A GROUND FAULT
INTERRUPTER CIRCUIT. THIS IS TO PROVIDE A
HIGH DEGREE OF SAFETY TO THE CUSTOMER. IF
THE PUMP DOES NOT RUN WHEN THE GAME IS
STARTED, CHECK THE RESET BUTTON ON THE
GROUND FAULT OUTLET ON. THE RESET
BUTTON MUST BE DEPRESSED DURING GAME
PLAY TO BE ACTIVATED. PUSHING THE RESET
BUTTON WHEN THE GAME IS OVER WILL NOT
HAVE ANY EFFECT.
19. Hold the drain hose into the 5 gallon pail and press
the VALUE button to start the pump.
20. Run the pump until the water comes out of the drain
hose clear. TURN PUMP OFF.
21. Turn the GAME / DRAIN valve to the GAME
position.
22. Start a 2 player game and check for proper
operation of the guns.
NOTE: IT IS NORMAL FOR THE GUNS TO
SPUTTER DURING THE FIRST GAME UNTIL
ALL OF THE AIR IS PURGED FROM THE
HOSES AND LINES.
23. Adjust the programming options as needed.
Summary of Contents for WATER BLAST LINKABLE
