BOB’S SPACE RACERS®
WATER BLAST
TM
(LINKABLE) ARCADE
8
5. While 2 people hold the game vertically, open the
coin door using the keys taped inside the return slot.
6. Remove the cash box to retrieve the connecting
bolts and power cord.
7. Push the upper cabinet fully back and secure the
upper cabinet with the (4) mounting bolts and washers
supplied.
8. Close the doors to be sure they line up evenly and
close securely. If either of the doors is lower than the
other, raise the mounting foot on the side of the game
with the lower door until the doors close evenly
.
9. With the doors open, slide the seat base under
the game until the holes in the base line up with the
holes in the bottom of the cabinet.
NOTE: JUST SCREW THE BOLTS INTO THE
SEAT BASE ENOUGH TO HOLD IN PLACE DO
NOT TIGHTEN DOWN OR THE SEAT BASE
WILL LIFT UP. THIS FREE-FLOATING DESIGN
ALLOWS THE SEAT BASE TO LEVEL TO THE
FLOOR INDEPENDENTLY OF THE GAME.
10. Plug the game into a suitable A.C. Receptacle.
11. Turn the game on to be sure it powers up
properly.
12. Remove the protective wrapping on the tank
screen and set the screen into the tank.
13. Get a bucket with 5 gallons of water in it to fill
the game reservoir.
NOTE: THE GAME COMES
WITH AN ALCOHOL WATER MIXTURE TO
PREVENT FREEZE DAMAGE WHEN SHIPPING
IN COLD CLIMATES. THIS FLUID SHOULD BE
WASHED OUT WHEN THE GAME IS SET-UP.
Summary of Contents for WATER BLAST LINKABLE
