manualshive.com logo in svg

Bobrick AirCraft B-701, Troubleshooting And Information Manual, Page: 30 / 66

Share
Download
Bobrick AirCraft B-701 Troubleshooting And Information Manual Download Page 30

Page 24 

DEDICATED LINE IS REQUIRED FOR EACH 115 VOLT DRYER. 

 

For  208

–240  Volt  Dryers: 

Connect  ground  (earthed)  wire  to  ground  (earthed)  terminal 

marked 

 and the 208-240 Volt wires to terminals marked L(L1) and N (L2). 

 
Make sure excess wire does not interfere with operation of dryer. 

 
REPLACE COVER. 
 

Replace  cover  by  positioning  top  of  cover  on  studs  on  top  of  aluminum  base  unit  and 
tipping  bottom  of  cover  toward  aluminum  base.  Push  bottom  of  cover  firmly  against  base. 

NOTE: 

Space between cover and base must be the same on bottom and both sides. 

To  tighten  two  cover  bolts,  insert  Allen  wrench  into  holes  on  bottom  edge  of  cover.  Make 
sure  wrench  fits  into  head  of  cover  bolts  and  turn  COUNTERCLOCKWISE  until  bolts  are 
tightened. 

NOTE: 

Do not over tighten cover bolts; over tightening cover bolts may damage 

enamel finish. 

 
CHECK DRYER OPERATION. 
 

To check operation of dryer, follow these instructions: 
 

For Touch Button Hair Dryers: 

Turn electrical power on. Touch the chrome-plated touch 

button  once  and  dryer  should  turn  on.  Touch  the  touch  button  again  after  a  few  seconds 
and dryer should stop. If left on Hair Dryers will shut off after 80 seconds. 
 

For Automatic Hand Dryers: 

Turn electrical power supply on. Position hands under nozzle 

and dryer should turn on. Remove hands from under nozzle and dryer should stop. 

Summary of Contents for AirCraft B-701



































































Reviews:

No comments