manualshive.com logo in svg

Bobrick AirCraft B-701, Troubleshooting And Information Manual, Page: 25 / 66

Share
Download
Bobrick AirCraft B-701 Troubleshooting And Information Manual Download Page 25

Page 19 

INSTALLATION INSTRUCTIONS BOBRICK SURFACE-

MOUNTED HAND AND HAIR DRYERS 

 
ELECTRICAL CHARACTERISTICS. 
 

115V AC, 20 Amp, 50/60 Hz, Single Phase, cULus listed 208

–240V AC, 9–10 Amp, 50/60 

Hz, Single Phase, cULus listed, VDE approved, CE marked, and CCC approved. 
 

REMOVAL OF COVER 
 

Start installation of dryer by removing cover. To loosen two cover bolts insert Allen Wrench, 
provided with dryer, into holes located on bottom of cover on each side of air intake grille. 
Make  sure  wrench  fits  into  head  of  cover  bolts  and  turn  CLOCKWISE  until  bolts  stop 
turning. When cover bolts are screwed in all the way, cover can be removed. 
To  remove  cover,  place  a  hand  on  each  side  of  cover  and  push  up  toward  top  of  dryer 
releasing cover from studs at top of mounting base. Lift cover off mounting base by pulling 
forward at the bottom and upward at the same time. 
 

INSTALLATION OF MOUNTING BASE. 
 

An Installation Template is supplied with each unit. 

 

 

RECOMMENDED MOUNTING HEIGHTS.  
 

Distance from floor to bottom mounting screw holes of mounting base (Dimension A). 
 

Hand dryer. 

 
Men’s Washrooms  .................................................................  46'' (117cm) 
Women’s Washrooms  ...........................................................  44'' (112cm) 
Children’s Washrooms, ages 3-9  ..........................................  32'' (81cm) 
Children’s Washrooms, ages 9-12  ........................................  36'' (91cm) 
Children’s Washrooms, ages 12-15  ......................................  40'' (102cm) 
Children’s Washrooms, ages 15-18  ......................................  44'' (112cm) 
For Wheelchair Access  .........................................................  38'' (97cm) 

Summary of Contents for AirCraft B-701



































































Reviews:

No comments