Boann Reverse Osmosis 5-Stage Water Filtration System, User Manual, Page: 3 / 24

3
boannstyle.com
Installation Instructions Prelude
The Boann Reverse Osmosis 5-Stage Water Filtration System has been designed as a Do-It-
Yourself filtration system. However, it is recommended to acquire the services of a licensed
professional to facilitate and expedite the installation process. To ensure a successful
installation, as well a fully-operating filtration system, carefully read this manual and follow all
operational guidelines.
The installation instructions set forth in this manual are very detailed and thorough. Should you
experience a leak during installation or usage, please see the Leak Prevention section on
page 18.
ATTENTION: It is very important to change the filter of your system in order to ensure pure water
is being produced and to avoid any premature system degradation. After installation is complete
and deemed successful, please read the Recommended Filter Replacement Schedule section on
page 19 and keep record on your calender when your system filters require replacement.
PLEASE NOTE: Water contaminants and/or foreign substances mentioned within this manual
are not necessarily present in all water. The Reverse Osmosis 5-Stage Water Filtration System
performs a succession of filtration steps to purify and optimize water for consumption.
Reverse Osmosis 5-Stage Water Filtration System Specifications
Dimensions:
R.O. System: 10.13” W x 14.63” H x 8” D
Tank: 11” W x 15” H x 11” D
Unit Weight: 11.5 lbs (R.O. System); 8 lbs (Tank)
Tank: 5 Gallons (Tank Capacity 3.2 Gallons)
Water Source Conditions:
Maximum Total Dissolved Solids (TDS): <2000 ppm
Water Pressure Range: 40-100 psi (2.8 bar)
Minimum Inlet Water Pressure: 40 psi (2.8 bar)
Water Temperature Range: 40 - 85˚F (4.5˚ - 30˚C)
Water pH Range: 4 -11
Pre-Installation Instructions