Boann Reverse Osmosis 5-Stage Water Filtration System, User Manual, Page: 11 / 24

11
boannstyle.com
The Auto Leak Detector Advantage
The Boann Reverse Osmosis 5-Stage Water Filtration System comes exclusively with an Auto
Leak Detector module, which is an invaluable part of the system and serves to detect the
presence of water (leakage) around the system. Should the Auto Leak Detector sense the
presence of a leakage, a water-absorbent cell will absorb neighboring water and initiate a
system shut-down, thus stopping excess water from damaging the unit and the
surrounding environment.
Leak Detector Parts:
Re-Activating the Auto Leak Detector
1. Every Auto Leak Detector module comes with 2 internal water-absorbent cells. Should the
system initiate a shut-down due to a leak, the replacement of the used cell will be required.
2. To open the housing module, simply pry the upper - spring trigger with your hand or use a flat
screwdriver to detach (pry) the upper from the housing.
3. Next, detach the blue cell holder and discard the used cell. Place a new cell inside the cell
holder and reinsert the upper - spring trigger onto the lower housing, making sure the spring
inserts into the cavity of the cell holder.
4. Apply firm pressure to connect the upper to the lower housing. You will hear a click when the
module is correctly assembled.
5. Reinstall or house the Auto Leak Detector back in its original location.
NOTE: Replacement water-absorbent cells can be purchased separately.
Installation Preparation
Manual Shut Off Valve
Cotton Water-Absorbent Cell
Leak Detector Housing
Used - Cotton
Water-Absorbent Cell
Upper - Spring
Trigger