Boann Reverse Osmosis 5-Stage Water Filtration System, User Manual, Page: 12 / 24

12
boannstyle.com
Preparing the Discharge Water Drain Clamp
Find the location on the drain pipe under your sink where you wish to secure the Discharge
Water Drain Clamp. CAUTION: Make sure the location chosen is above the Trap, and is at least
3-4” above the return line. (The Trap is the “U” shape part of the drain pipe) You may secure the
saddle clamp on the horizontal pipe, as long as the clamp is above the Trap. It is also advisable to
secure the drain clamp in a location that it is not blocking anything.
1. Drill out the chosen spot with a 1/4” drill bit. The 1/4” hole that is created into the chosen
location on the drain pipe is where the black discharge line will be inserted and secured
into place with the Discharge Water Drain Clamp.
2. If not already attached to the Discharge Water Drain Clamp, take the rubber gasket that’s
provided and remove its paper backing.
R.O. Filtration System Installation
Drain Trap
Tip!
A redesigned Discharge Water Drain Clamp has been added to the RO Water
Filtration System. System assembly of the new drain clamp is the same process, as
noted in this section; however attachment of the PE tubing is facilitated by way of a
quick-connect collet opening on the redesigned drain clamp.
Rubber Gasket