▷
To ensure proper transmission of the stored
data, do not charge a USB device via the on‐
board socket, when it is connected to the
USB port.
▷
Depending on how the USB device is being
used, settings may be required on the USB
storage device, refer to the owner's manual of
the device.
Non-compatible USB devices:
▷
USB hard drives.
▷
USB hubs.
▷
USB memory card readers with multiple slots.
▷
HFS-formatted USB devices.
▷
Devices such as fans or lamps.
Wireless charging tray
Concept
The wireless charging tray enables the following
functions to be performed without cables:
▷
Charging the rechargeable battery of a mo‐
bile phone with Qi capability and of other mo‐
bile devices, which support the Qi standard.
▷
Connect the mobile phone to the external an‐
tenna.
Depending on the country, this provides for
better network reception and a consistent re‐
production quality.
General information
When inserting the mobile phone, make sure
there are no objects between it and the wireless
charging tray.
During charging, the surface of the tray and the
mobile phone may become warm. Higher tem‐
peratures may lead to a reduction in the charge
current through the mobile phone, and in iso‐
lated cases the charging process is paused tem‐
porarily. Follow the relevant instructions in the
mobile phone owner's manual.
NOTE
This device has been tested for human exposure
limits and found compliant at a minimum dis‐
tance of 4 in/10 cm during operation.
Therefore, a distance of 4 in/10 cm must be
maintained in every direction when operating the
device.
Mounting position of the product.
Safety information
Warning
When charging a device that meets the Qi
standard in the wireless charging tray, any
metal objects located between the device and
the tray can become very hot. Placing storage
devices or electronic cards, such as chip cards,
cards with magnetic strips or cards for signal
transmission, between the device and the tray
may impair the card function. There is a risk of
injury and risk of damage to property. When
charging mobile devices, make sure there are
no objects between the device and the tray.
NOTICE
The tray is intended for mobile phones up to a
particular size. Forceful inserting of the mobile
phone into the tray can damage the tray or the
mobile phone. There is a risk of damage to
property, among other potential damage. Ob‐
serve the maximum dimensions for mobile
Seite 205
Interior equipment
CONTROLS
205
Online Edition for Part no. 01405A2CF16 - II/21
Summary of Contents for X2 2021
