BMW X2 2021, Owner'S Manual

Page: 120 / 304

Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from rolling
away.
Engaging selector lever position N
Unlocking is possible, if the starter can spin the
engine.
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter must
audibly start.
3. Press the button on the selector lever, ar‐
row 1, and press and hold the selector lever
into selector lever position N, arrow N, until
selector lever position N is displayed in the in‐
strument cluster.
A Check Control message is displayed.
4. Release the selector lever.
5. Release brake, as soon as the starter stops.
6. Maneuver the vehicle from the danger area
and secure it against moving on its own.
For additional information, see the chapter on
tow-starting and towing.
Steptronic Sport transmission:
Launch Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry sur‐
rounding conditions.
General information
The use of Launch Control causes premature
component wear since this function represents a
very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page
216 , period.
To start with Launch Control, point the front
wheels straight forwards.
Functional requirements
Launch Control is available as soon as the engine
and transmission are at operating temperature.
Depending on the outside temperature and driv‐
ing style, the engine and transmission require an
interrupted trip of up to 30 miles/50 km in order
to reach the operating temperature needed for
Launch Control.
Start with launch control
While the engine is running:
1. Press the button and select SPORT
with the Driving Dynamics Control.
TRACTION is displayed in the instrument
cluster in combination with SPORT and the
DSC OFF indicator light lights up.
2. Engage selector lever position S.
3. With the left foot, forcefully press down on
the brake.
4. Press and hold down the accelerator pedal
beyond the resistance point at the full throttle
position, kickdown.
A destination flag is displayed in the instru‐
ment cluster.
5. The starting engine speed adjusts. Wait
briefly until the engine speed is constant.
Keep accelerator pedal in this position.
6. Release the brake within 3 seconds after the
destination flag illuminates.
The vehicle accelerates.
Seite 120
CONTROLS
Driving
120
Online Edition for Part no. 01405A2CF16 - II/21