BMW R 1250RS, Rider'S Manual, Page: 78 / 279

NOTICE
If the high-beam headlight is
switched on while the daytime
riding light is on, the daytime
riding light is switched off after
approx. 2 seconds and the
high-beam headlight, low-beam
headlight and front side light are
switched on.
If the high beam headlight is
switched off again, the daytime
running light is not automat-
ically reactivated, but must be
switched on again if required.
Automatic daytime riding
light
NOTICE
The changeover between
daytime riding light and low-
beam headlight including front
side lights can be effected
automatically.
WARNING
The automatic daytime rid-
ing light does not replace the
personal assessment of the
light conditions
Risk of accident
Switch off the automatic day-
time riding light in poor light
conditions.
In the
Settings
,
Vehicle
settings
,
Lights
menu,
switch on the
Auto. dayt.
rid. light
function.
The indicator light for the
automatic daytime riding
light lights up.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B. in a
tunnel). When sufficient ambi-
ent brightness is detected, the
daytime riding light is switched
back on.
The indicator light for the
daytime riding light shows if
the daytime riding light is active.
Manual operation of the
light when the automatic
system is switched on
If you press the button for
the daytime riding light, the
automatic daytime riding light
is switched off and the low-
beam headlight and front side
lights are switched on (e.g.
when you ride into a tunnel
and the response of the auto-
matic daytime riding light to
the change in ambient bright-
ness is delayed). The auxiliary
headlight switches on again
when the daytime riding light is
switched off.
Pressing the daytime riding
light button again reactivates
the automatic daytime riding
4
76
z Operation