BMW R 1250RS, Rider'S Manual, Page: 54 / 279

WARNING
Tyre pressure outside the
permitted tolerance.
Risk of accident, degradation of
the vehicle's driving characterist-
ics.
Adapt your style of riding
accordingly.
Possible cause:
Measured tyre pressure is out-
side permitted tolerance.
Check the tyre for damage
and to ascertain whether the
vehicle can be ridden with the
tyre in its present condition.
If the vehicle can be ridden with
the tyre in its present condition:
Correct the tyre pressure at the
earliest possible opportunity.
Before adjusting the tyre pres-
sure, observe the information
on temperature compensation
and pressure adaptation in the
section entitled "Engineering
details":
Temperature compensation
(
159)
Pressure adaptation ( 159)
Find the correct tyre pressures
in the following places:
On the back cover of the
rider's manual
Instrument cluster in the
TYRE
PRESSURE
view
Sign under the seat
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
Retailer.
If you are unsure whether the
vehicle can be ridden with the
tyre in its present condition:
Do not continue your journey.
Notify the breakdown service.
Transmission fault
with tyre pressure control
(RDC)
OE
"
---
"
Possible cause:
The vehicle has not reached the
minimum speed (
158).
RDC sensor is not active
min 30 km/h (The RDC sensor
does not transmit its signal
to the vehicle until a certain
minimum speed has been
reached.)
Observe the RDC display at
higher speeds.
A permanent fault is
present only when the
general warning light also lights
up.
Under these circumstances:
3
52
z Status indicators