BMW R 1250RS, Rider'S Manual, Page: 180 / 279

If you decide that you would like
to fit non-standard wheels to
your motorcycle, it is very im-
portant to consult a specialist
workshop beforehand, preferably
an authorised BMW Motorrad
dealer. In some cases, the data
programmed into the control
units can be changed to suit the
new wheel sizes.
RDC sticker
with tyre pressure control
(RDC)
OE
ATTENTION
Tyre removal not in compli-
ance with correct procedure
Damage to RDC sensors
Be sure to explain to the spe-
cialist workshop or authorised
BMW Motorrad dealer that the
wheel is fitted with an RDC
sensor.
An appropriate sticker will
be found on the rim at the
position of the RDC sensor on
motorcycles fitted with RDC.
Take care that the RDC sensor
is not damaged when the tyre is
changed. Draw the attention of
your BMW Motorrad retailer or
the specialist workshop to the
RDC sensor.
Removing front wheel
Make sure the ground is level
and firm and hold the motor-
cycle upright.
with centre stand
OE
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Remove bolt 1 and remove the
wheel speed sensor from its
bore.
9
178
z Maintenance