BMW M3 SEDAN Owner'S Manual Download Page 38

Page: 38 / 392

▷

With objects with corners, edges, and
smooth surfaces.

▷

With objects with a fine surface structure
such as fences.

▷

For objects with porous surfaces.

▷

With small and low objects, for instance
boxes.

▷

With soft obstacles or obstacles covered in
foam material.

▷

With plants and bushes.

▷

In automatic car washes.

▷

On uneven surfaces, such as speed bumps.

▷

Due to heavy exhaust.

▷

Cargo that extends beyond the perimeter of
the vehicle is not taken into account by the
ultrasonic sensors.

If applicable, a Check Control message is dis‐
played if the system fails.

Seite 38

CONTROLS

Sensors of the vehicle

Online Edition for Part no. 01405A1E4B0 - X/20

Summary of Contents for M3 SEDAN









































































































































































































































































































































































































Search results

Summary of Contents for M3 SEDAN

Reviews:

Related manuals for M3 SEDAN

Brands by name

Popular brands

BMW M3 SEDAN, Owner'S Manual

Search results

Summary of Contents for M3 SEDAN

Reviews:

Related manuals for M3 SEDAN

Brands by name

Popular brands