manualshive.com logo in svg

BMW M3 SEDAN, Owner'S Manual, Page: 254 / 392

Share
Download
BMW M3 SEDAN Owner'S Manual Download Page 254

▷

When reverse parking diagonally to the road,
diagonal parking. The system orients itself
with the middle of the parking space during
diagonal parking.

General information

Handling

Parking assistant handling is divided into three
steps:

▷

Switching on and activating.

▷

Parking space search.

▷

Parking.

System status and instructions on required ac‐
tions are displayed on the Control Display.
Ultrasound sensors measure parking spaces on
both sides of the vehicle.

Manual transmission

The parking assistant calculates the best possi‐
ble parking line and takes control of steering dur‐
ing the parking operation.

M Steptronic Sport transmission

The parking assistant calculates the best possi‐
ble parking line and takes control of the following
functions during the parking operation:

▷

Steering.

▷

Accelerating and braking.

▷

Changing gears.

The parking operation is automatic.

Safety information

Warning

The system cannot serve as a substitute for the
driver’s personal judgment in assessing the
traffic conditions. Based on the limits of the
system, it cannot independently react to all traf‐
fic situations. There is a risk of accident. Adjust
driving style to traffic conditions. Watch traffic

closely and actively intervene where appropri‐
ate.

NOTICE

The parking assistant can steer the vehicle over
or onto curbs. There is a risk of damage to
property. Watch traffic closely and actively in‐
tervene where appropriate.

The safety information of the PDC Park Distance
Control applies in addition.
Additional information:
PDC Park Distance Control, refer to page 

247

.

Overview

Button in the vehicle

Park assistance button

Sensors

The system is controlled by the following sen‐
sors:

▷

Ultrasound sensors in the front/rear bumpers.

▷

Ultrasonic sensors, side.

Additional information:
Sensors of the vehicle, refer to page 

35

.

Seite 254

CONTROLS

Driver assistance systems

254

Online Edition for Part no. 01405A1E4B0 - X/20

Summary of Contents for M3 SEDAN









































































































































































































































































































































































































Reviews:

No comments