manualshive.com logo in svg

BMW M3 SEDAN, Owner'S Manual, Page: 146 / 392

Share
Download
BMW M3 SEDAN Owner'S Manual Download Page 146

Programs

Pro‐
gram

Drive mode

Sequential
mode

 

D1/S1

Efficient driving.

Comfortable shift‐
ing operations.

 

D2/S2

Fast driving.

Sporty, fast shift‐
ing operations.

 

D3/S3

Sporty driving.

Maximum shifting
speed, Launch
Control.

Selecting a channel

Via the rocker switch on the selector lever

Press the rocker switch repeatedly until
the desired program is displayed in the

instrument cluster.

Via iDrive

It is possible to configure the required program
for buttons M1 or M2.

1.

"CAR"

2.

  "M menu"

3.

"Configure M1" or "Configure M2"

4.

  "Transmission"

5.

Select the desired channel

▷

"D1" to "D3": Drive mode.

▷

"S1" to "S3": sequential mode.

The setting is immediately applied with active
M1 or M2 configuration.

To activate the desired configuration with the se‐
lected settings, press the corresponding button
on the steering wheel:

▷

▷

Display in the instrument cluster

The selected program corre‐
sponds to the number of illumi‐
nated fields.

Launch Control

Concept

Launch Control enables optimum acceleration
on surfaces with good traction under dry sur‐
rounding conditions.

General information

The use of Launch Control causes premature
component wear since this function represents a
very heavy load for the vehicle.
Do not use Launch Control during the break-in
period.
Do not steer the steering wheel when driving off
with Launch Control.
Additional information:
Breaking-in period, refer to page 

306

.

Functional requirements

Launch Control is available when the engine is at
operating temperature. The engine is at operat‐
ing temperature after an uninterrupted trip of at
least 6 miles/10 km.

Start with launch control

1.

Switch on drive-ready state.

2.

Deactivate Dynamic Stability Control.

Seite 146

CONTROLS

Driving

146

Online Edition for Part no. 01405A1E4B0 - X/20

Summary of Contents for M3 SEDAN









































































































































































































































































































































































































Reviews:

No comments