BMW K 1600 GTL, Rider'S Manual

Page: 75 / 176

The anti-theft alarm telltale light
then signals the reason for the
alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Alarm system is
disconnected from the motor-
cycle battery
Flashes 5x: Motion sensor 3
Deactivation without
remote control
with anti-theft alarm
OE
Safety cutout switch in operat-
ing position (run).
Switch on ignition.
Turn signals are illuminated
once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Deactivation with remote
control
with anti-theft alarm OE
with central locking OE
Press button 2 on the remote
control once.
See also the other func-
tions of the remote control
for the central locking system.
If the alarm function is de-
activated with the remote
control, and if the ignition is not
switched on subsequently, then
the alarm function automatically
becomes active again after 30
seconds when "Activation after
ignition off" is programmed.
Turn signals are illuminated
once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customizing anti-theft
alarm settings
with anti-theft alarm
OE
Call up the
Settings
menu and select
Vehicle
-
Alarm syst.
.
4
73
z Operation