BMW K 1600 GTL Rider'S Manual Download Page 100

Page: 100 / 176

Check that the navigation de-
vice is secure in the cradle.
Press cover

to push cradle

with navigation device into the
slot until it snaps into position.

Removing navigation
device

Switch on ignition.

Press button

to open the slot

for the navigation device.
Slot cover pops open, wind-
screen moves to top limit posi-
tion.

Pull slot cover up as far as it
will go.

Operate latch

, pull the nav-

igation device forward out of
holder

and lift it up and out.

Install cover

Press cover

to push the cra-

dle into the slot until it snaps
into position.

Insert cap

Operating navigation
device

If applicable, switch on the nav-
igation device.
Call up the

Navigation

menu.

Accessories

Summary of Contents for K 1600 GTL

















































































































































































Search results

Summary of Contents for K 1600 GTL

Reviews:

Related manuals for K 1600 GTL

Brands by name

Popular brands

BMW K 1600 GTL, Rider'S Manual

Search results

Summary of Contents for K 1600 GTL

Reviews:

Related manuals for K 1600 GTL

Brands by name

Popular brands