BMW K 1600 GTL Rider'S Manual Download Page 112

Page: 112 / 176

Topping up engine oil

Make sure ground is level and
firm and park motorcycle.
Wipe area around fill location
clean.

Remove oil dipstick

Both too little and too
much engine oil can lead to

engine damage.
Always make sure that the oil
level is correct.

Add engine oil up to specified
level.
Checking engine oil level
(

108).

Install oil dipstick.

Brake system

Checking brake operation

Pull handbrake lever.
Pressure point must be clearly
perceptible.
Press footbrake lever.
Pressure point must be clearly
perceptible.

If no clear pressure points are
perceptible:

Incorrect working practices
endanger the reliability of

the brakes.
Have all work on the brake sys-
tem carried out by specialists.

Have the brakes checked by a
certified workshop, preferably
an authorized BMW Motorrad
retailer.

Checking front brake pad
thickness

Make sure ground is level and
firm and park motorcycle.

Visually inspect left and right
brake pads to ascertain their
thickness. Viewing direction:
between wheel and front sus-
pension toward brake pads

110

Maintenance

Summary of Contents for K 1600 GTL

















































































































































































Search results

Summary of Contents for K 1600 GTL

Reviews:

Related manuals for K 1600 GTL

Brands by name

Popular brands

BMW K 1600 GTL, Rider'S Manual

Search results

Summary of Contents for K 1600 GTL

Reviews:

Related manuals for K 1600 GTL

Brands by name

Popular brands