BMW K 1600 GTL, Rider'S Manual

Page: 38 / 176

Possible cause:
The DTC control unit has de-
tected an error. The DTC func-
tion is not available.
Continued driving is possible.
It must be noted that the DTC
function is not available. Ob-
serve additional information on
situations which can lead to a
DTC error (
90).
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Tire inflation pressure
outside permissible
tolerance
with Tire Pressure Control
(TPC/RDC)
OE
General warning light
flashes red.
+ the critical tire pressure
shows red.
Possible cause:
The measured tire inflation pres-
sure is outside the permissible
tolerance.
Check tire for damage and
drivability.
Is it still possible to drive with tire:
Incorrect tire inflation pres-
sure result in poorer han-
dling of the motorcycle.
Always adapt your driving style
to the incorrect tire inflation
pressure.
Correct tire inflation pressure at
next opportunity.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
Have the tire checked for dam-
age by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
If you are unsure about the driv-
ability of the tire:
Do not continue driving.
Inform roadside service.
Transmission error
with Tire Pressure Control
(TPC/RDC)
OE
+ "
--
" or "
-- --
" is indi-
cated.
Possible cause:
The motorcycle's speed has not
exceeded the threshold of ap-
prox. 20 mph (30 km/h). The
TPC/RDC sensors do not send
their signal until after this speed
has been exceeded for the first
time (
91).
Watch RDC display at higher
speed. A permanent fault has
not occurred until the general
3
36
z Status indicators