![BMW K 1600 GTL Rider'S Manual Download Page 24](http://html1.mh-extra.com/html/bmw/k-1600-gtl/k-1600-gtl_riders-manual_2780858024.webp)
If the sensor cannot register the
new level the range display can-
not be updated.
If the motorcycle is standing on
the side stand, the fuel level can-
not be correctly determined due
to the inclined position. For this
reason the range is only cal-
culated with the side stand re-
tracted.
The determined range is an
approximate reading. BMW
Motorrad therefore recommends
that you do not try to use the full
range before refueling.
Ambient temperature
When the motorcycle is
stopped, the engine heat
can falsify the measurement
of the ambient temperature. If
the influence of the engine heat
becomes too great,
--
is tem-
porarily shown in the display.
If the ambient temperature
drops below 37 °F (3 °C),
this warning of possible icing-
up appears. The display auto-
matically switches from any other
mode to the temperature read-
ing when the temperature drops
below this threshold for the first
time.
Tire inflation pressures
with Tire Pressure Control
(TPC/RDC)
OE
The displayed tire inflation pres-
sures refer to a tire temperature
of 68 °F (20 °C) . The left-hand
value
1
indicates the air pres-
sure of the front wheel, and the
right-hand value
2
the inflation
pressure of the rear wheel. Im-
mediately after switching on the
ignition, "
-- --
" is displayed, as
the transfer of the inflation pres-
sure values does not begin until
a speed of 19 mph (30 km/h) is
exceeded for the first time.
3
22
z
Status indicators
Summary of Contents for K 1600 GTL
