BMW K 1200 Rsport, Rider'S Manual

Page: 46 / 162

moves one step through the
following sequence:
Total distance covered
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
Residual range (without on-
board computer, once fuel
level is down to reserve)
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button
1 until the reading changes.
The tripmeter is reset to
zero.
Residual range
without OE On-board
computer:
The residual-range readout
1 indicates how far you can
ride with the fuel remaining
in the tank. This reading is
not displayed until fuel level
has dropped to reserve. This
distance is calculated on the
basis of fuel level and average
consumption.
When you refuel, the increase
in fuel level is not registered
unless several litres are ad-
ded to the fuel already in the
tank.
The calculated range is
an approximate value.
Consequently, BMW Motorrad
recommends that you should
not try to use the full residual
range before refuelling.
Clock
Setting clock
Attempting to set the
clock while riding the
motorcycle can lead to ac-
cidents.
Set the clock only when the
motorcycle is stationary.
Switch on the ignition.
4
44
z Operation