BMW K 1200 Rsport Rider'S Manual Download Page 94

Page: 94 / 162

an authorised BMW Motorrad
dealer.

Check operation of the
brakes

Pull the handbrake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.

Brake pads

Checking brake-pad
thickness, front brakes

Brake pads worn past
the minimum permissible

thickness can cause a reduc-
tion in braking efficiency and
under certain circumstances
they can cause damage to
the brake system.
In order to ensure the de-
pendability of the brake sys-
tem, do not permit the brake

pads to wear past the minim-
um permissible thickness.

Make sure the ground is
level and firm and place the
motorcycle on its stand.

Visually inspect the left and
right brake pads to ascer-
tain their thickness.

Brake-pad thickness,
front

The wear indicators on
the brake pads must be
clearly visible.

If the wear indicating mark is
no longer clearly visible:

Have the brake pads re-
placed by a specialist work-
shop, preferably an author-
ised BMW Motorrad dealer.

Maintenance

Summary of Contents for K 1200 Rsport



































































































































































Search results

Summary of Contents for K 1200 Rsport

Reviews:

Brands by name

Popular brands

BMW K 1200 Rsport, Rider'S Manual

Search results

Summary of Contents for K 1200 Rsport

Reviews:

Brands by name

Popular brands