BMW K 1200 Rsport Rider'S Manual Download

Page: 60 / 162

Using luggage loops

Make sure the ground is
level and firm and place the
motorcycle on its stand.
Removing the seat (

55)

Turn the seat upside down.

Pull loops

out of holders

You can hook luggage
straps into the loops.

Mirrors

Adjusting mirrors

Move the mirror to the de-
sired position by pressing it
lightly close to the edge.

Adjusting mirror arm

Push the protective cap up
over the threaded fastener
on the mirror arm.
Back off nut

by turning it

clockwise (left-hand thread).
Turn the mirror arm to the
appropriate position.
Retighten the nut.

Mirror to clamping
piece

22 Nm

Push the protective cap
over the threaded fastener.

Operation

Summary of Contents for K 1200 Rsport



































































































































































Search results

Summary of Contents for K 1200 Rsport

Reviews:

Related manuals for K 1200 Rsport

Brands by name

Popular brands

BMW K 1200 Rsport, Rider'S Manual

Search results

Summary of Contents for K 1200 Rsport

Reviews:

Related manuals for K 1200 Rsport

Brands by name

Popular brands